Machine construction
Main castings of this machine are of high-grade casting and forging materials that have been under annealing treatment for eliminating internal friction force, assuring high-precision, high rigidity and extending the mechanical life.

Slide way
The left and right, front and rear Double-V slide ways are adhered with abrasion-proof resin-TURCHITE-B and have been under precise shoveling, thus they can slide smoothly and be abrasion-proof and is best for forming and grinding.

Cartridge directly-connected spindle
Directly-connected spindle of this machine is P4-class super-precise bevel ball bearing that can produce small noise, no vibration and great torque force under great revolution and is applicable to heavy-duty cutting and different forming and grinding.

Automatic lubricating system
It takes up the circulating automatic lubricating system. When the spindle starts up, the lubricating oil will make automatic circulation, provide all of screws and slide ways with forced lubrication to greatly reduce abradability of the slide ways. There is a set of oil immersion lens above the machine column for monitoring lubrication.

General Capacity
Table size: 150x 355mm (6 x 14″)
Max. grinding length: 375mm (14-3/4″)
Max. grinding width: 160mm (6-1/3″)
Distance from table surface to spindle center: 350-400mm (13.8-15.7″)
Standard magnetic chuck size: 150x300 (6x12″)

Cross Traverse Feed
Manual travel: 380mm (15″)

Longitudinal Movement
Manual travel: 180mm (7″)
Hand wheel per graduation: 0.02mm (0.001″)
Hand wheel per revolution: 5mm (0.2″)

Vertical Down feed
Hand wheel per graduation: 0.005mm (0.002″)
Hand wheel per revolution: 1mm (0.05″)

Grinding Wheel
Wheel size (dia.x widthxbore)
180x16x32mm (7x2/3x1-/1/4″)
Spindle speeds (60HZ/50HZ)
3600/3000rpm

Motor
Spindle motor: 1HP/1.5HP

Weight
Net: 560kgs (1232lbs)
Gross: 690kgs (1518lbs)

Packing size
LengthxWidthxHeight
1300x1150x1980mm (52x45x78″)

Standard accessory
1. Grinding wheel and flange
2. Grinding wheel detacher
3. Grinding wheel spanner
4. Table-model diamond dressing pedestal
5. Hanging ring
6. Rail lubricating oil
7. Tool box and adjusting tools
8. Horizontal adjusting screw and cushion block
9. Operating instructions

Special accessory
1. Optical and electronic ruler
2. Magnetic chuck
3. Pressure absorption device
4. Cooling device
5. Frequency converter